Front Passenger's Airbag Replacement

Removal


1.Disconnect the battery negative cable, and wait at least 3 minutes before beginning work.

2.Open the glove box, then remove the inner box.

3.Disconnect the connector between the front passenger's airbag 2P connector (A) and the dashboard wire harness B 2P connector (B).

 

4.Remove the three mounting nuts (A) from the bracket. Cover the lid and dashboard with a cloth, and pry carefully with a screwdriver to lift the front passenger's airbag (B) out of the dashboard.

NOTE: The airbag lid has pawls on its side which attach it to the dashboard.

 

Installation


1.Place the new front passenger's airbag (A) into the dashboard. Tighten the front passenger's airbag mounting nuts (B).

 

2.Connect the front passenger's airbag 2P connector (A) to the dashboard wire harness B 2P connector (B), then reinstall the inner box.

 

3.Reconnect the battery negative cable.

4.After installing the airbag, confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator should come on for about 6 seconds and then go off.