Center Console Removal/Installation

NOTE:

1.Remove the parking brake cover lid (A).

 

2.M/T: Remove the shift knob.

 

3.Remove the center console (A):

-1 Remove the screws (B), and clips (C).
-2 Lift the rear of the console up to detach the clip (D), and pull the console rearward to release the front hook (E) from the heater unit.
-3 Disconnect the cigarette lighter connector (F).

 

4.Install the console in the reverse order of removal, and note these items:

  • Replace any damaged clips.
  • Make sure the wire harness is not pinched.
  • Set the rib (G) under the pocket onto the parking brake lever bracket (H) correctly.