Taillight Replacement

1.Remove the rear bumper.

2.Open the tailgate and remove the maintenance lid.

3.Disconnect the connectors (A) from the taillight (B).

Brake/Taillight: 21/5 W 
Turn Signal Light: 21 W 
Back-Up Light: 21 W 
Rear Fog Light: 21 W (KG,KR and KE models) 

 

4.Remove the mounting nuts and the screw, then remove the taillight.

5.When installing the taillight, check for the gasket; if it is distorted or stays compressed, replace it.

6.After installing the taillight, run water over the taillight to make sure they do not leak.