Sunroof Limit Switch Adjustment

1.Remove the headliner.

Fully closed position adjustment


2.With the sunroof wrench, close the glass (A) fully:

 

3.With an open-end wrench, loosen the limit switch mounting bolts (C).

4.Adjust the limit switch (D):

  • Move the switch plate (E) a little at a time, then secure it at the position where you hear a faint click when the switch cam (F) pushes the position switch (open/close).
  • Check that the switch plate contacts the switch bracket (G).

One-stop position adjustment (for some models)


5.With the sunroof wrench, operate the glass (A) to one-stop position.

 

6.With an open-end wrench, loosen the position switch mounting bolts (C).

7.Adjust the limit switch (D):

  • Move the switch plate (E) a little at a time, then secure it at the position where you hear a faint click when the switch cam (F) pushes the position switch (one-stop).
  • Check that the switch plate contacts the switch bracket (G).

8.Check the operation of the glass by operating the sunroof switch:

  • With one-stop limit switch: From the tilt-up position to fully closed position, from the fully closed position to one-stop position, from the one-stop position to fully open position.
  • Without one-stop limit switch: From the tilt-up position to fully closed position, from the fully open position to the fully closed position.

9.Check for water leaks. Let the water run fleely from a hose without a nozzle. Do not use a high-pressure spray.