Door Lock Knob Switch Test - With Super Locking

With Super Locking (Driver's door):


1.Remove the driver's door panel.

2.Disconnect the 6P connector (A) from the super locking actuator.

 

3.Check for continuity between the terminals.

  • There should be continuity between the No. 3 and No. 4 terminals when the door lock knob switch is LOCK position.
  • There should be continuity between the No. 1 and No. 4 terminals when the door lock knob switch is UNLOCK position.

With Super Locking (Passenger's door):


1.Remove the passenger's door panel.

2.Disconnect the 6P connector (A) from the super locking actuator.

 

3.Check for continuity between the terminals.

  • There should be continuity between the No. 1 and No. 4 terminals when the door lock knob switch is UNLOCK position.