M/T Countershaft Bearing Replacement

Special Tools Required
Adjustable bearing puller, 25-40 mm (  07JAC-PH80100)
 

Bearing remover shaft (  07JAC-PH80200)
 
Slide hammer (  07741-0010201)
 
Driver (  07749-0010000)
 
Attachment, 52 x 55 mm (  07746-0010400)
 


1.Remove the needle bearing (A) using the special tool, then remove the oil guide plate C.

 

2.Position the oil guide plate C and new needle bearing (A) in the bore of the clutch housing (B).

 

3.Install the needle bearing using the special tools.