Rocker Arm Assembly Installation

1.Install the rocker arm assembly (A) with dowel pin (B).

NOTE: When reassembling the rocker arms, Install the rocker arm from cam chain side on the rocker shaft.

 

2.Tighten each bolts two turns at a time in sequence below.

Specified torque:
29 N·m (3.0 kgf·m, 22 lbf·ft) 
Apply engine oil to the bolt threads and flange 

 

3.Remove the rubber bands (A) from the intake rocker arms.

4.Adjust the valve clearance.

5.Install the cylinder head cover.