DTC Troubleshooting: 67

DTC 67:  Brake Pedal Position Switch (Hardwear)

1.Check the brake pedal position switch.

Is the switch OK?


YES - Go to 2.


NO - Replace the brake pedal position switch.n


2.Disconnect the VSA control unit 46P connector.

3.Turn the ignition switch ON (II).

4.Measure the voltage between body ground and the VSA control unit 46P connector terminal No. 6 when the brake pedal is released.

 

Is there battery voltage?


YES - Repair short to power in the wire between the VSA control unit and under-hood fuse/relay box.n


NO - Replace the VSA modulator-control unit.n