DTC Troubleshooting: 75

DTC 75:  Lateral Acceleration Sensor (Joint Failure)

1.Check the installation condition of the yaw rate/lateral acceleration sensor.

Is it correctly installed?


YES - Go to 2.


NO - If the loose the mounting bolts, tighten the mounting bolts properly, and recheck.n


2.Park the vehicle on a level surface. Check YAW RATES LATERAL in the DATA LIST with the HDS.

Is the result?


YES - Check for loose connector terminals in the VSA control unit 46P connector and repair if necessary. If terminals are OK, replace the VSA modulator-control unit.n


NO - Replace the yaw rate/lateral acceleration sensor.n