Skip to main content
Honda Fit Jazz GE6 GE8
Engine Oil Pan Removal
If the engine is already out of the vehicle, go to
Drain the engine oil.
Remove the drive belt.
Remove the driveshaft heat shield.
Remove the A/C compressor without disconnecting the A/C hoses.
A/T model: Remove the shift cable cover.
Remove the torque rod bracket.
Remove the dipstick, then remove the dipstick tube.
Remove the crankshaft position (CKP) sensor cover (A), then disconnect the CKP sensor connector (B).
Remove the clutch cover/torque converter cover (A), and transmission mounting bolts (B).
Remove the bolts securing the oil pan.
Using a flat blade screwdriver, separate the oil pan from the block in the places shown.
Remove the oil pan.