Skip to main content
SRS Symptom Troubleshooting - Side airbag cutoff indicator does not come on

Side airbag cutoff indicator does not come on
NOTE:
  1. Turn the ignition switch to LOCK (0), then wait for 10 seconds.
  1. Turn the ignition switch to ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes off.
Does the side airbag cutoff indicator come on?
YES -
Intermittent failure, the system is OK at this time.
NO -
Go to Step 3 .
  1. Make sure the HDS communicates with the vehicle and the SRS unit. If it does not communicate, troubleshoot the DLC circuit.
Does the side airbag cutoff indicator come on?
YES -
NO -
Faulty gauge control module; replace the gauge control module.