Skip to main content
Audio Remote Switch Test

  1. Disconnect the cable reel 20P connector (A).
  1. Measure the resistance between the No. 3 and No. 7 terminals in each switch position according to the table.
    Position
    Resistance
    No button pressed
    About 10 kΩ
    MODE
    About 3.7 kΩ
    CH (+)
    About 1.7 kΩ
    CH (−)
    About 775 Ω
    (VOL.UP)
    About 357 Ω
    (VOL.DOWN)
    About 100 Ω

  1. If the resistance is not as specified, replace the audio remote switch.