Skip to main content
Front Door Weatherstrip Replacement

NOTE:
  • Take care not to scratch the door and related parts.
  • Use a clip remover to remove the clips.
  • RHD model is shown; LHD model is symmetrical.
  1. At the front pillar, remove the door checker mounting bolt (A).
  1. Detach the clips (B, C, D, E), then remove the door weatherstrip (F).
  1. Install the weatherstrip in the reverse order of removal and note these items:
    • Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
    • Make sure the weatherstrip is installed in the holder (G) securely.
    • Apply medium strength type liquid thread lock to door stop mounting bolt before installation.