Skip to main content
Front Fender Fairing Replacement

NOTE:
  • Put on gloves to protect your hands.
  • Take care not to scratch the body.
  1. From the wheel arch, remove the clip and the maintenance plug (A).
  1. Release the hooks (B) of the front fender enclosure (C) from the holes in the front fender, and pull the fender enclosure out, then remove it.

  1. Install the fender enclosure in the reverse order of removal, and note these items:
    • Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
    • Before installing the clips, make sure the hooks (A) of the front fender enclosure (B) is installed into the holes (C) in the front fender securely.
    • Push the clip into place securely.