Skip to main content
Front Pillar Corner Trim Replacement

NOTE:
  • Put on gloves to protect your hands.
  • Take care not to scratch the corner trim and the body.
  • When removing components, use the trim tools or equivalent.
  1. Carefully insert the trim tool (A) next to the grommet (B), and detach the grommet by prying on the front pillar corner trim (C), then detach the tab (D).
    NOTE: Apply protective tape (E) to the body as shown.

  1. While sliding the front pillar corner trim forward in the direction shown, detach the clips (A) and the tab (B) from the body, then remove the trim.
  1. Install the trim in the reverse order of removal, and note these items:
    • Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
    • Push the clips into place securely.