Skip to main content
Dashboard Vent Removal/Installation

Side Vent
NOTE:
  • Take care not to scratch the dashboard and its related parts.
  • RHD model is shown; LHD model is symmetrical.
  1. Pull the fin (A) of the side vent (B) toward you and release the hooks (C) and remove the side vent.
  1. Install the side outlet in the reverse order of removal and push the hooks into place securely.
Driver's side
Passenger's side

Center Vent
NOTE:
  • Take care not to scratch the dashboard and its related parts.
  • RHD model is shown; LHD model is similar.
  1. Remove the center panel:
  1. Remove the screws, then remove the center vent panel (A) from the center panel (B).
  1. Release the hooks (C), then remove the center vent (D) from the center vent panel.
  1. Install the center vent in the reverse order of removal and push the hooks into place securely.