Skip to main content
Interior Trim Removal/Installation - Cargo Areas

  • Put on gloves to protect your hands.
  • Take care not to bend or scratch the trim and panels.
  • When removing components, use the trim tools or equivalent.
Rear Trim Panel
  1. Release the hooks (A), then pull up the cargo floor (B) and remove it.

  1. Remove the rear trim panel (A).
    Disengage the tabs (B) and hooks (C) on both sides from both cargo area side trim panel (D).
    Detach the clips by pulling the panel up.
  1. Install the trim in the reverse order of removal, and note these items:
    • Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
    • Push the clips, hooks, and tabs into place securely.