Skip to main content
Rear Seat Control Cable Replacement

NOTE:
  • Take care not to tear the seams or damage the seat covers.
  • Put on gloves to protect your hands.
  • Take care not to kink the cable.
  • The left rear seat cushion is shown, the right rear seat cushion is similar.
  1. Fold the leg, and remove the wire tie (A).
  1. Disconnect the control cable (B) from the leg end (C) and cable bracket (D) of the seat cushion frame.
  1. Install the cable in the reverse order of removal, and note these items:
    • Replace the wire tie you removed with new ones.
    • Make sure the control cable is routed properly and connected securely.
    • Fix at the original position in the end of the cable on the cable bracket securely. And check the rear seat tip-up operation:
      Make sure the rear seat cushion unlocks by lifting the leg. If necessary, adjust the position of the cable end.