Skip to main content
Rear Seat Cushion Leg Replacement

NOTE:
  • Take care not to tear the seams or damage the seat covers.
  • Put on gloves to protect your hands.
  • Take care not to kink the cable.
  • The left rear seat cushion is shown, the right rear seat cushion is similar.
  1. Remove the leg (A) from the seat cushion frame (B):
    -1.
    Disconnect the control cable.
    -2.
    Release the push nuts (C), then remove the set pins (D).
    -3.
    Remove the leg.
    -4.
    If necessary, remove the bushings (E), the cable hook (F), and the spring pins (G).
  1. Install the leg in the reverse order of removal, and note these items:
    • Replace the push nuts and spring pins you removed with new ones.
    • Make sure the control cable is connected securely.
    • Apply multipurpose grease to the inside surfaces of the brackets (H).