Skip to main content
Rear Seat-back Cover/Pad Replacement

  • When removing components, use the trim tools or equivalent.
  • Take care not to tear the seams or damage the seat covers.
  • Put on gloves to protect your hands.
  • The left rear seat is shown, the right rear seat is similar.
  1. Remove the these items:
  1. If equipped, remove the shelf hooks (A) and shelf holder covers (B) from the back of the seat-back.

  1. Release the hook strip (A), and unzip the seat-back cover and pull back the cover (B).

  1. Release the hooks (A) from the seat-back frame (B).

  1. Pull out the seat-back cover/pad (A) from the frame, then pull out the head restraint guides (B) and center head restraint guides (C) (for some model) while pinching the end of the guides, and remove them.

  1. Release the hooks (A) from the seat-back frame (B).

  1. Remove the seat-back cover/pad (A) and the silencer (B) from the seat-back frame (C). If necessary, release the hooks (D) and remove the latch lever inner cover (E).
  1. Install the seat-back cover/pad in the reverse order of removal. To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hooks.