Skip to main content
Door Lock Actuator Test - Without Super Locking

Driver's Door
  1. Disconnect the 10P connector (A) from the actuator (B).

  1. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.
  1. If the actuator does not operate as specified, replace it.

Front Passenger's Door
  1. Disconnect the 10P connector (A) from the actuator (B).

  1. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.
  1. If the actuator does not operate as specified, replace it.

Left Rear Door
  1. Disconnect the 10P connector (A) from the actuator (B).

  1. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.
  1. If the actuator does not operate as specified, replace it.

Right Rear Door
  1. Disconnect the 10P connector (A) from the actuator (B).

  1. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.
  1. If the actuator does not operate as specified, replace it.