Skip to main content
Door Lock Actuator Test - With Super Locking

Driver's Door with Super Locking
  1. Disconnect the 10P connector (A) from the actuator (B).

  1. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.
  1. If the actuator does not operate as specified, replace it.

Front Passenger's Door with Super Locking
  1. Disconnect the 10P connector (A) from the actuator (B).

  1. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.
  1. If the actuator does not operate as specified, replace it.

Left Rear Door with Super Locking
  1. Disconnect the 10P connector (A) from the actuator (B).

  1. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.
  1. If the actuator does not operate as specified, replace it.

Right Rear Door with Super Locking
  1. Disconnect the 10P connector (A) from the actuator (B).

  1. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.
  1. If the actuator does not operate as specified, replace it.