Skip to main content
DTC Troubleshooting: B1188

DTC B1188:
 Gauge Control Module Lost Communication with MICU (RM Message)
  1. Clear the DTCs with the HDS.
  1. Turn the ignition switch to LOCK (0), and then back to ON (II).
  1. Wait for 6 seconds or more.
  1. Check for DTCs with the HDS.
Is DTC B1188 indicated?
YES -
Go to Step 5 .
NO -
Intermittent failure, the system is OK at this time. Check for loose or poor connections between the gauge control module and the MICU.■
  1. Check for DTCs with the HDS.
Are DTCs B1188 and B1905 indicated?
YES -
NO -