Skip to main content
Floor and Rear Body Construction

NOTE: Confirm that the sold as repair parts, refer to the appropriate Parts Catalog.
NOTE:
  • The parts marked with numbers are sold as repair parts.
  • The parts marked with letters are not sold separately and are shown only for reference.
  • [ ]: Thickness unit: mm (in.)
  • High-tension steel sheet: Tensioner strength 340 to 590 MPa.
No.
Part Name
Tensioner strength (MPa)
Zinc-plating
(1)
Front Floor Comp.
a:
Front Floor [0.6] (0.024)
270
b:
Front Floor Frame [1.8] (0.071)
590
c:
Floor Center Stiffener
Tunnel [0.7] (0.028)
270
Cross-member [1.6] (0.063)
590
d:
Center Cross-member [1.6] (0.063)
590
-1
Front Inside Sill [1.4] (0.055)
590
e:
Front Seat Outer Bracket [1.8] (0.071)
590
f:
Inside Sill Gusset [1.6] (0.063)
590
(2)
Rear Floor Panel [0.6] (0.024)
270
(3)
Rear Frame Comp.
-1
Rear Frame B [1.0] (0.039)
440
-2
Right Side Frame End Bulkhead [1.8] (0.071)
270
-3
Rear Eye Bolt Upper Stiffener [1.2] (0.047)
270
-4
Rear Eye Bolt Lower Stiffener [1.4] (0.055)
270
-5
Rear Eye Bolt Stiffener [2.6] (0.10)
440
-6
Left Side Frame End Bulkhead [1.2] (0.047)
270
(4)
Middle Floor Cross-member Comp.
a:
Middle Floor Cross-member Stiffener [0.7] (0.028)
270
b:
Middle Seat Rear Cross-member [1.0] (0.039)
440
c:
Rear Frame A [1.2] (0.047)
590
d:
Side Sill Extension [1.4] (0.055)
590
(5)
Rear Floor Side Panel Comp.
a:
Rear Floor Side [0.9] (0.035)
440
b:
Rear Floor Side Extension [0.5] (0.02)
270
c:
Rear Floor Side Gusset [1.2] (0.047)
270
(6)
Rear Floor Extension [0.6] (0.024)
270
(7)
Rear Panel Comp.
a:
Rear Panel
Panel [0.6] (0.024)
270
Upper Stiffener [0.7] (0.028)
270
-1
Rear Panel Side Stiffener [1.0] (0.039)
270
-2
Rear Bumper Face Stiffener [1.2] (0.047)
270
(8)
Tailgate
Skin [0.65] (0.026)
270
Frame [0.6] (0.024)
270