Skip to main content
Front Bulkhead Removal

NOTE: This section explains the procedures after removal of all accessories and related parts.For accessories' and related parts' removal procedure, refer to the appropriate Shop Manual.
Mass production body welding position and number
  • Welding symbols
    : 2-Plate spot welding/ : 3-Plate spot welding/ : 4-Plate spot welding/ : MIG plug welding/ : MIG welding L= Welding length Unit: mm (in.)
  • ( ): The number of welds
  • Replace the front bulkhead side stay and the lower cross-member stiffener as an assembly.
  • If necessary, replace the bulkhead lower cross member.