Skip to main content
Rear Floor/Rear Frame Removal

NOTE: This section explains the procedures after removal of all accessories and related parts.For accessories' and related parts' removal procedure, refer to the appropriate Shop Manual.
Mass production body welding position and number [Rear floor, rear floor side, and rear frame B]
  • Welding symbols
    : 2-Plate spot welding/ : 3-Plate spot welding/ : 4-Plate spot welding/ : MIG plug welding/ : MIG welding L= Welding length Unit: mm (in.)
  • ( ): The number of welds
  • Remove the rear floor and the rear floor side, and replace them.
  • If there is any damage to the rear frame, replace the rear frame B, and repair the rear frame A.