Skip to main content
Rear Floor/Rear Frame Installation

NOTE:
  • Welding symbols
    : 2-Plate spot welding
    : 3-Plate spot welding
    : 4-Plate spot welding
    : MIG plug welding
    : MIG welding
    L= Welding length Unit: mm (in.)
  • ( ): The number of welds
  1. Set the new rear frame B, and measure the rear frame diagonally.
  1. Check the body dimensions.
  1. Tack weld the rear frame B into position.
  1. Temporarily install the trailing arm, check the rear suspension position.
  1. Set the new rear floor side, and the rear floor.
  1. Clamp the rear panel, check the body dimensions.
  1. Remove the rear panel, the rear floor, and the rear floor side. Plug weld the rear frame B, and the rear frame A.
  1. Set the rear floor side, the rear floor, and recheck the alignment of the rear panel.
  1. Do the main welding. Weld the rear floor side (A) and the floor side extension (B).
  1. From the rear wheelhouse side, plug weld the rear frame B, the rear frame A, the rear floor side (C), and the floor side extension (D).
  1. Plug weld the rear floor (A).