Skip to main content
Dashboard Fuse Lid Panel Removal/Installation

RHD Model
NOTE:
  • Take care not to scratch the dashboard and its related parts.
  • When removing components, use the trim tools or equivalent.
  1. Pull out the fuse lid panel (A) to detach the clips.

  1. Gently pull down the bottom edge of the fuse lid panel (A) to detach the hooks (B).
  1. Install the panel in the reverse order of removal, and note these items:
    • Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
    • Push the clips and the hooks into place securely.