Skip to main content
Dashboard Driver's Lower Cover Removal/Installation

RHD Model
  • Take care not to scratch the dashboard and its related parts.
  • When removing components, use the trim tools or equivalent.
  1. Remove the driver's dashboard lower cover (A).
    Use the trim tool to pry the bottom side of the panel partially out.
    Pry the front bottom of the panel slightly toward you and release the clips and the hooks (B).
  1. Install the lower cover in the reverse order of removal, and note these items:
    • Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
    • Push the clips and the hooks into place securely.