Skip to main content
Clutch Hose Replacement

NOTE:
  • Replace the clutch hose it is twisted, cracked, or if it leaks.
  • Use fender covers to avoid damaging painted surfaces.
  • Do not spill brake fluid on the vehicle; it may damage the paint or plastic. If brake fluid does contact the paint or plastic, wash it off immediately water.
  1. Disconnect the clutch hose (A) from the clutch lines (B).

  1. Remove and discard the clutch hose clips (A) from the clutch hose (B).

  1. Install the clutch hose (A) with the new clutch hose clips (B).

  1. Connect the clutch lines (A) to the clutch hose (B).
  1. Do the following checks:
    • Check the clutch hose and line joint for leaks, and tighten if necessary.
    • Check the clutch hose for interference and twisting.
  1. Test-drive the vehicle.