Skip to main content
A/T Housing Reverse Idler Gear Installation

  1. Lightly coat the reverse idler gear shaft (A), the needle bearing (B), and the new O-rings (C) with lithium grease.
  1. Assemble the new O-rings and the needle bearing on the reverse idler gear shaft, then install the reverse idler gear shaft in the reverse idler gear shaft holder (E). Align the D-shaped cut out of the shaft with the D-shaped area of the holder.

  1. Install the reverse idler gear in the transmission housing in the direction shown.

  1. Install the reverse idler gear shaft/holder assembly in the reverse idler gear.
  1. Secure the holder with the bolts.