Skip to main content
A/T End Cover Transmission Fluid Pressure Switch Replacement

  1. Remove the 2nd clutch transmission fluid pressure switch (A).
  1. Make sure there is no water, oil, dust, or foreign particles inside the connector.
  1. Install the new 2nd clutch transmission fluid pressure switch and a new sealing washer (B), and tighten the metal part of the switch.
  1. Remove the 3rd clutch transmission fluid pressure switch (C).
  1. Make sure there is no water, oil, dust, or foreign particles inside the connector.
  1. Install the new 3rd clutch transmission fluid pressure switch and a new sealing washer (D), and tighten the metal part of the switch.