Skip to main content
A/T 3rd Clutch Transmission Fluid Pressure Switch Replacement

  1. Raise the vehicle on a lift, or apply the parking brake, block rear wheels, and raise the front of the vehicle. Make sure it is securely supported.
  1. Remove the splash shield.
  1. Disconnect the 3rd clutch transmission fluid pressure switch connector, then remove the 3rd clutch transmission fluid pressure switch (A).
  1. Install the new 3rd clutch transmission fluid pressure switch with a new sealing washer (B), and tighten the metal part of the switch.
  1. Make sure there is no water, oil, dust, or foreign particles inside the connector.
  1. Connect the connector securely.
  1. Install the splash shield.