Skip to main content
A/T Clutch Pressure Control Solenoid Valve A Replacement

  1. Remove the bolt (A) securing the harness cover.
  1. Remove the bolt (B) securing the ATF cooler line/hose bracket.
  1. Remove the transmission hanger/air cleaner housing bracket (C).

  1. Disconnect A/T clutch pressure control solenoid valve connector (A).
  1. Remove the mounting bolts and A/T clutch pressure control solenoid valve A (B).
  1. Remove the ATF pipe (C), ATF joint pipes (D), O-rings (E), and gasket (F).
  1. Clean the mounting surface and fluid passages of the transmission housing.
  1. Install the new gasket with blue side down; white side up on the transmission housing.
  1. Install the ATF pipe and ATF joint pipes, and install the new O-rings over the ATF joint pipes.
  1. Install A/T clutch pressure control solenoid valve A.
  1. Install the transmission hanger/air cleaner housing bracket, and secure the ATF cooler line/hose bracket and harness cover with the bolts.
  1. Check the connector for rust, dirt, or oil, clean or repair if necessary, then connect the connector securely.