Skip to main content
Torque Converter Housing Countershaft Bearing and Oil Seal Replacement

Special Tools Required

Adjustable bearing remover set

Driver handle 15 x 135L

Oil seal driver attachment, 58 mm
  1. Remove the countershaft bearing with the special tool.

  1. Install the ATF guide plate (A).
  1. Install the new countershaft bearing (B) in the housing with the special tools; install the bearing outer race surface in height (C) of 0−0.03 mm (0−0.001 in.) above the housing surface (D). Do not install the bearing exceeding 0.03 mm (0.001 in.) high from housing surface.