Skip to main content


Reverse idler gear

Item
Measurement
Qualification
Standard or New
Service Limit
Reverse idler gear
Reverse idler gear shaft O.D. at needle bearing contact area
14.99−15.00 mm (0.590−0.591 in.)
When worn or damaged
I.D.
20.001−20.014 mm (0.7874−0.7880 in.)
When worn or damaged
I.D. of reverse idler gear shaft contact area on transmission housing
14.800−14.818 mm (0.5827−0.5834 in.)
———
I.D. of reverse idler gear shaft holder
14.800−14.824 mm (0.5827−0.5836 in.)
When worn or damaged