Skip to main content


Secondary shaft - 2/2

Item
Measurement
Qualification
Standard or New
Service Limit
Secondary shaft - 2/2
4th gear collar length
32.9−33.0 mm (1.295−1.299 in.)
———
4th gear collar flange thickness
3.75−3.90 mm (0.148−0.154 in.)
When worn or damaged
Sealing ring thickness
1.87−1.97 mm (0.074−0.078 in.)
1.82 mm (0.072 in.)
Width of sealing ring groove
2.025−2.060 mm (0.0797−0.0811 in.)
2.080 mm (0.0819 in.)
Clutch feed pipe O.D.
2nd clutch
6.97−6.98 mm (0.2744−0.2748 in.)
6.95 mm (0.2736 in.)
4th clutch
11.47−11.48 mm (0.4516−0.4520 in.)
11.45 mm (0.4508 in.)
Clutch feed pipe bushing O.D.
2nd clutch
7.018−7.030 mm (0.2763−0.2768 in.)
7.045 mm (0.2774 in.)
4th clutch
11.500−11.518 mm (0.4528−0.4553 in.)
11.530 mm (0.4539 in.)
ATF guide collar I.D. at sealing ring contact area
21.200−21.221 mm (0.8346−0.8355 in.)
21.25 mm (0.8366 in.)