Skip to main content
Cylinder Head Rocker Arm and Shaft Disassembly/Reassembly

L15A8 engine
NOTE:
  • Identify each part as it is removed so that each item can be reinstalled in its original position.
  • If reused, the rocker arms must be installed in the their original location.
  • Remove the rocker shaft bolt before removing the rocker shaft from the No. 5 rocker shaft holder.
  • Prior to reassembling, clean all the parts in solvent, dry them, and apply new engine oil to any contact points.
  • When replacing the rocker arm assembly, remove the fastening hardware from the new rocker arm assembly.
  • When reassembling the rocker arm and shaft assembly, position the arrows on the rocker shaft holders facing the cam chain side.

L13Z3 engine
NOTE:
  • Identify each part as it is removed so that each item can be reinstalled in its original position.
  • If reused, the rocker arms must be installed in the their original location.
  • Remove the rocker shaft bolt before removing the rocker shaft from the No. 5 rocker shaft holder.
  • Prior to reassembling, clean all the parts in solvent, dry them, and apply new engine oil to any contact points.
  • When replacing the rocker arm assembly, remove the fastening hardware from the new rocker arm assembly.
  • When reassembling the rocker arm and shaft assembly, position the arrows on the rocker shaft holders facing the cam chain side.