Skip to main content
Hood Opener Cable Replacement

  • Put on gloves to protect your hands.
  • Take care not to scratch the body and the related parts.
  1. Remove these items:
  1. Using a clip remover, detach the clips (D, E), and peel the vinyl tapes (F) being wound onto the opener cable off, then remove the hood opener cable from the grommet (G). Take care not to kink the cable.
  1. Install the cable in the reverse order of removal, and note these items:
    • Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
    • Make sure the cable is connected properly.
    • Make sure the hood opens properly and locks securely.