Skip to main content
i-SHIFT System Functional Test

Clutch Actuator Full Stroke Operation
By the command from the HDS, the master cylinder in the clutch actuator is moved to full stroke position.
This functional test can be done under these conditions:
  • IG switch on.
  • Engine not running.
  • N position.
  • Drivers side door closed.
Engage Gears
By the command from the HDS, the clutch actuator and transmission shift change actuator operates, and shifts to any gear.
This functional test can be done under these conditions:
  • IG switch on.
  • Engine not running.
  • N position.
  • Synchronizing position learning has been completed.
NOTE:
  • Specify a gear, and forcibly shift to that gear (usual paddle shifter is until 2nd).
  • When diagnosing malfunction of the TCM or Motor, use it depending on the cause of malfunction.