Skip to main content


Mainshaft

Item
Measurement
Qualification
Standard or New
Service Limit
Mainshaft
End play
0.11−0.18 mm (0.004−0.007 in.)
Adjust
Diameter of bushing surface
14.870−14.890 mm (0.5854−0.5862 in.)
14.77 mm (0.5815 in.)
Diameter of distance collar
28.992−29.005 mm (1.1414−1.1419 in.)
28.93 mm (1.139 in.)
Diameter of ball bearing contact area (clutch housing side)
25.977−25.990 mm (1.0227−1.0232 in.)
25.92 mm (1.020 in.)
Diameter of needle bearing contact area
34.984−35.000 mm (1.3773−1.3780 in.)
34.93 mm (1.375 in.)
Diameter of ball bearing contact area (transmission housing side)
24.987−25.000 mm (0.9837−0.9843 in.)
24.93 mm (0.981 in.)
Runout
0.02 mm (0.001 in.) max.
0.05 mm (0.002 in.)