Skip to main content
DTC Troubleshooting: P19EF (151-22)

DTC P19EF:
 Shift Actuator Motor Position Sensor Ground Line Open
  1. Turn the ignition switch to ON (II).
  1. Clear the DTCs with the HDS.
  1. Turn the ignition switch to LOCK (0).
  1. Turn the ignition switch to ON (II).
  1. Check for DTCs with the HDS.
Is DTC P19EF indicated?
YES -
Go to Step 6 .
NO -
Intermittent failure, the system is OK at this time.■
  1. Turn the ignition switch to LOCK (0).
  1. Disconnect the shift actuator motor 6P connector.
  1. Disconnect TCM connector B (40P).
  1. Check for continuity between TCM connector terminal B1 and shift actuator motor 6P connector terminal No. 2.
Is there continuity?
YES -
NO -
Repair an open in the wire of the change actuator subharness A.■