Skip to main content
DTC Troubleshooting: P19FB (160-22)

DTC P19FB:
 Clutch Contact Position 1 and 2 Learning Not Completed
NOTE: If the Clutch Contact Position 1, 2 Learning is incomplete after replacing the clutch disc, repeat the Clutch Contact Position 1, 2 Learning several times. If the Clutch Contact Position 1, 2 Learning is still incomplete, check the clutch disc installation.
  1. Turn the ignition switch to ON (II).
  1. Clear the DTCs with the HDS.
  1. Check for DTCs with the HDS.
Is DTC P19FB indicated?
YES -
Go to Step 5 .
NO -
Intermittent failure, the system is OK at this time.■
  1. Turn the ignition switch to LOCK (0).
  1. Check for DTCs with the HDS.
Is DTC P19FB indicated?
YES -
Go to Step 7 and repeat the steps.
NO -
Clutch Contact Position 1, 2 Learning is complete.■