Skip to main content
DTC Troubleshooting: P19FE (160-25)

DTC P19FE:
 Clutch Contact Position Adaptation Learning Value Out of Range
  1. Turn the ignition switch to ON (II).
  1. Clear the DTCs with the HDS.
  1. Check for DTCs with the HDS.
Is DTC P19FE indicated?
YES -
Go to Step 5 .
NO -
Intermittent failure, the system is OK at this time.■
  1. Turn the ignition switch to LOCK (0).
  1. Turn the ignition switch to LOCK (0).
  1. Check for DTCs with the HDS.
Is DTC P19FE indicated?
YES -
Go to Step 10 .
NO -
The system is OK at this time.■
  1. Turn the ignition switch to LOCK (0).
  1. Do the CLUTCH FLUID FILLING in the ADJUSTMENT MENU with the HDS.
  1. Turn the ignition switch to ON (II).
  1. Check for DTCs with the HDS.
Is DTC P19FE indicated?
YES -
NO -
Check for these conditions, and repair if necessary:■
  • Slave cylinder
  • Release system