Skip to main content
Fuel Fill Pipe Removal/Installation

  1. Remove the fuel fill cap.
  1. Lift the vehicle, and support it with jackstands.
  1. Remove the left rear wheel.
  1. Remove the EVAP canister filter pipe clamp (A) (LHD model).

  1. Disconnect the fuel fill tube (A) and the breather tube (B) from the fuel fill pipe. Slide back the clamp, then twist the hose as you pull to avoid damaging them.
  1. Remove the fuel fill pipe (C).
  1. Install the parts in the reverse order of removal.