Skip to main content
Blower Unit Removal/Installation

  1. Cut the plastic cross brace (A) in the glove box opening with diagonal cutters in the area (B). Retain plastic cross brace to be reinstalled later.

  1. Remove the bolts, and the glove box frame (A).

  1. Disconnect the connectors (A) from the blower motor and the recirculation control motor. Remove the clips (B).

  1. Remove the self-tapping screws and the passenger's heater duct (A).

  1. Remove the self-tapping screws, the mounting nuts, and the blower unit (A).
  1. Install the unit in the reverse order of removal. Make sure that there is no air leakage.