Skip to main content
Dashboard Side Lid Removal/Installation

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
  • Take care not to scratch the dashboard and its related parts.
  • When removing components, use the trim tools or equivalent.
  • LHD model is shown; RHD model is symmetrical.
  1. Remove the Passenger's dashboard side lid (A).
    Insert a hand through the opening of the glove box and push the back side of the lid, and release the hooks (B).
    Release the hooks (C) from the dashboard and disconnect the front passenger's airbag ON/OFF switch connector (for some models) (D), then remove the lid.
  1. Install the lid in the reverse order of removal, and push the hooks into place securely.