Skip to main content
Automatic Lighting/Rain Sensor Replacement

NOTE:
  • If the automatic lighting/rain sensor 5P connector is connected after the battery terminal is connected, the automatic lighting/rain sensor is not confirmed by the MICU.
  • If the MICU does not confirm the automatic lighting/rain sensor, automatic wiper system does not work.
  • Connect the automatic lighting/rain sensor 5P connector first, then connect the battery terminal.
  1. Remove the automatic lighting/rain sensor cover (A) and disconnect the 5P connector (B).
  1. Remove the lock (C), then remove the automatic lighting/rain sensor (D).
  1. Install the automatic lighting/rain sensor in the reverse order of removal.