Skip to main content
Headlight Leveling Motor Replacement

With HID
  1. Turn the HID light cover (A) 45 ° counterclockwise to remove it from the headlight housing.

  1. Pulling the headlight reflector (A) slightly, turn the leveling motor (B) 45 ° clockwise, and pull down the tip (C) of the leveling motor.
  1. Install in the reverse order of removal.
  1. After installation, adjust the headlight.

Without HID
  1. Remove the rubber cap (A).

  1. Pulling the headlight reflector (A) slightly, turn the leveling motor (B) 45 ° clockwise, and pull down the tip (C) of the leveling motor.
  1. Install in the reverse order of removal.
  1. After installation, adjust the headlight.