Skip to main content
Headlight Leveling Switch Test/Replacement

  1. Disconnect the 6P connector (A) from the headlight leveling switch (B), then push out the switch from the dashboard lower cover.
  1. Measure the resistance between the No. 2 and No. 4 terminals, and No. 3 and No. 4 terminals at positions 0, 1, 2, and 3 by moving the switch knob.
    Between the No. 2 and No. 4 terminals:
    About 4.4 kΩ or 4.6 kΩ (KE and KG models)

    Between the No. 3 and No. 4 terminals:

    Knob position
    0
    1
    2
    3
    Resistance [About (kΩ)]
    0.487
    1.887 or 1.727 *
    2.181 or 2.376 *
    2.879 or 3.108 *

    *: KE and KG models
  1. If the resistance is not as specified, replace the switch.